A yau zan Gabatar ne game da veneers masu goyan bayan takarda, kayan kwalliyar itace, da bawo da sandal.

Yawancin nau'ikan veneers da muke siyarwa sune:

• 1/64 ″ Takarda Tallafi
• 3/64 ″ Itace Baya
• Duka abubuwan da ke sama ana iya yin oda tare da kwasfa 3M da mannen sanda
• Girman girma daga 2'x 2' zuwa 4' x 8' - Wani lokaci ya fi girma

1/64 ″ Takarda Mai Tallafawa

Rubutun da ke goyan bayan takarda suna da sirara da sassau?a, musamman idan kun lan?wasa su da hatsi. Wannan lan?wasawa na iya zuwa da gaske idan kuna ?o?arin lan?wasa veneer ?inku a kusa da kusurwa ko kuma idan kuna da madaidaicin wuri ko madaidaicin saman da kuke aiki dashi.

Makullin takardar takarda ce mai tauri, mai ?arfi, mai tsawon mil 10 baya wacce ke ?aure ta har abada ga katakon itace. Tabbas, gefen takarda shine gefen da kuke mannawa. Kuna iya amfani da mannen ma'aikacin katako ko tuntu?ar siminti don manne bangon takarda da ke ?asa. Hakanan ana iya yin oda veneers ?in takarda tare da za?in bawo na 3M da mannen sanda.

Kuna iya yanke veneers masu goyan bayan takarda tare da wuka mai amfani ko almakashi. Don yawancin filaye, za ku yanke veneer mafi girma fiye da yankin da za ku yi veneer. Sa'an nan kuma kina manne veneer ?asa da kuma datsa kusa da gefuna da reza wuka don samun daidai dace.

?

3/64 ″ Kayan Wuta Mai Tallafawa Itace

Itace mai goyan bayan itacen 3/64 kuma ana kiranta "2 ply veneer" saboda an yi ta ta amfani da zanen gado 2 wanda aka manne a baya. Zai dace a kira shi "2 ply veneer", "veneer supported wood" ko "2 ply wood supported veneer".

Iyakar bambance-bambance tsakanin 1/64 "takarda goyon bayan veneers da 3/64" itace goyon bayan veneers ne kauri, kuma ba shakka, irin baya. ?arin kauri na katako mai goyan baya, ha?e tare da ginin katako na baya, yana ba da ?arin ?arfi da kwanciyar hankali idan aka kwatanta da takarda da aka goyan baya.

Za'a iya yanke veneers na itacen baya, kamar yadda takarda ke goyan baya, ana iya yanke shi da wuka mai aska, har ma da almakashi. Kuma, kamar yadda takarda ke goyan bayan veneers, katako mai goyan bayan itace kuma ya zo tare da bawo na za?i na 3M da mannen sanda.

?

Takarda Tallafawa Veneer Ko Itace Taimakawa Veneer - Ribobi Da Fursunoni

Don haka, wanne ya fi kyau - bangon bangon takarda ko katako mai goyan bayan itace? A zahiri, yawanci zaka iya amfani da ?ayan ?ayan don yawancin ayyuka. A wasu yanayi, kamar lokacin da kake da ?asa mai lan?wasa, abin rufe fuska na takarda na iya zama mafi kyawun za?inka.

Wani lokaci katako mai goyan bayan itace shine kawai hanyar da za a bi - kuma wannan zai kasance lokacin da kuke bu?atar ?arin kauri don rage duk wani nau'in telegraph ta hanyar veneer daga wani wuri mara daidaituwa, ko daga aikace-aikacen siminti mara daidaituwa. - Ko, watakila don saman tebur ko saman da ke samun lalacewa da tsagewa.

Idan kun yi amfani da simintin tuntu?a don mannen ku, wasu nau'ikan ?arewa, kamar lacquer, musamman idan an yi ?asa kuma an fesa, na iya ji?a ta cikin bangon takarda da ke goyan bayan simintin. Wannan ba ya faruwa sau da yawa, amma idan kuna son ?arin tazarar aminci, ?arin kauri na katako mai goyan bayan itace zai hana duk wani shinge na ?arewa zuwa manne.

Abokan cinikinmu suna amfani da duka takarda da goyan baya da katako na katako tare da nasara. Wasu daga cikin abokan cinikinmu suna amfani da takarda da ke goyan bayan veneers na musamman kuma wasu abokan ciniki sun fi son katako mai goyan bayan itace.

Na fi son katako mai goyan bayan itace. Sun fi fin karfi, sun fi arha, sau?in amfani, kuma sun fi gafartawa. Suna kawar da matsaloli tare da ?arewa kuma suna rage ko kawar da telegraphing na lahani wanda zai iya kasancewa a kan substrate. Gaba?aya, Ina tsammanin cewa katakon da ke goyan bayan itace yana ba da ?arin gefen aminci, koda lokacin da mai sana'a ya yi wasu kurakurai.

?

Sanding Da Kammalawa

Dukkanin lefen ?inmu na takarda da katako masu goyan baya ana yin yashi a masana'antar mu, don haka yashi ba ya zama dole. Don kammalawa, kuna amfani da tabo ko ?arewa a cikin katako na katako kamar yadda kuke shafa tabo ko ?arewa ga kowane saman katako.

Idan kun yi amfani da simintin lamba don manna kayan aikinmu na takarda, ku sani cewa wasu abubuwan da aka gama da mai da tabo da kuma ?arancin lacquer, musamman idan an fesa ?asa kuma an fesa, na iya shiga cikin veneer kuma su kai hari kan simintin. Wannan ba yawanci matsala bane amma yana iya faruwa. Idan kun yi amfani da veneers masu goyon bayan itace, wannan ba matsala ba ne, kamar yadda kauri da katako na baya ya hana wannan.

?

Kwasfa na 3M na za?i da mannen sanda

Amma ga kwasfa da manne - Ina son shi sosai. Muna amfani da mafi kyawun mannen 3M kawai don kwasfa da kayan kwalliyar sanda. Bawon 3M da ?wan?olin sanda sun tsaya da gaske. Kawai sai ku bare takardar saki kuma ku manna veneer ?in ?asa! Bawon 3M da sandal veneers sun kwanta na gaske, mai sau?i da sauri. Tun 1974 muke siyar da bawon 3M da kayan kwalliyar sanda kuma abokan cinikinmu suna son su. Babu wani rikici, babu hayaki da tsaftacewa.

Ina fatan wannan koyawa ta kasance mai taimako. Duba sauran koyaswar mu da bidiyoyi don ?arin umarni game da shingen katako da dabarun veneering.

?